Table of Contents
Advertisement
MODEL CR3001 with non-dedicated interface
1. From the C prompt type "MODE COM1 96,N,8,2" and press
ENTER.
2. Type "TYPE CON>COM1" and press ENTER.
3. TYPE "^G" and press ENTER. The cash drawer will open if the
security code is 07 Hex as set by the manufacturer.
NOTE:If another security code has been selected to open the
cash drawer then the corresponding ASCII character must be
substituted to open the drawer.
4. To return to the C prompt press and hold the CTRL key while
depressing the letter C.
MODEL CR3001 with parallel interface
1. From the C prompt type "ECHO ^G>LPT1" and press ENTER.
The cash drawer will open if the security code is 07 Hex as set
by the manufacturer.
NOTE: If another security code has been selected to
open the cash drawer then the corresponding ASCII character
must be substituted to open the drawer.
The computer has automatically returned to the C prompt.
5
Advertisement
Table of Contents
Need help?
Do you have a question about the CR3000 and is the answer not in the manual?
Questions and answers