Programming Instructions - Listen LT-800 Design Manual & Manual

LR-500 Programming Instructions (LR-500 only)

Programming Instructions

Entering Program Mode
1
To enter program mode
1A
While the unit is ON, press and hold the channel down and up buttons simultaneously for 3 seconds.
1B
The "PGM" icon on the LCD will appear indicating program mode is active.
2
To program
2A
Pressing the seek button will enter that particular function.
channels. Pressing the seek button will toggle between available and locked out for that channel. When a chan
NOTE: Although it is possible to display an F2 function while in program mode, there is no F2 function at this
time. Listen may add another programming function in the future, but there is only one programming
function (F1) on the 863 MHz receivers.
3
When no button is pressed for 10 seconds, the program menu is exited altogether, regardless of whether a
3A
3B
the programming menu.
3C
Pressing and holding power for a full 4 seconds will exit both programming function and programming menu.
59