Programming Instructions - Listen LT-700-072 User Manual

LT-700 Programming Instructions
The LT-700 can be programmed to transmit on a limited number of channels. For applications where
users are required to select a channel (such as classrooms or language interpretation), and you
don't want them to have to scroll through all of the available channels, this feature is ideal. You can
set up the LT-700 so that only the channels they need to use are available for selection with the UP
and DOWN buttons.
1
Enter PROGRAM Mode
Press and hold the UP and DOWN keys simultaneously until the PGM symbol is displayed (see the
Look & Listen™ Quick Reference on page 6).
2
Scroll Through Channels to Lock or Unlock
Use the UP and DOWN channel select keys to scroll through all available channels. If the L/O symbol
appears with a particular channel's indicator, this means that particular channel will not be
available for selection by the user. To toggle a channel between locked out and available, press
the POWER button.
3
To exit PROGRAM mode
Allow the unit to sit idle (don't press any buttons) for 5 seconds. The LT-700 will exit the
PROGRAM mode and the PGM icon will disappear.
11