18x12w rgbw 4in1 led bar with single-led control (36 pages)
Summary of Contents for CentoLight Scenic C1027
Page 1
Scenic C1027 Scenic C1027 27x10W RGBW 4in1 LED PAR with 20° beam for indoor use PAR per uso interno con 27 LED da 10W RGBW 4IN1 e apertura del fascio a 20° User Manual Manuale Utente Carefully read this manual and properly take care of it...
Page 2
Dear customer, First of all thanks for purchasing a CENTOLIGHT® product. Our mission is to satisfy all possible needs of light designers and professionals of entertainment lighting, by offering a wide range of products based on the latest technologies. We hope you will be satisfied with this fixture and, if you want to collaborate, we are looking for a feedback from you about product operation and possible im- provements to be introduced in the next future.
Thank you for purchasing SCENIC C1027. Enjoy your new equipment and make sure to read this manual carefully before operation! This user manual is made to provide both an overview of controls, as well as information on how to use them.
1.4. Disclaimer The information and specifications contained in this User Manual are subject to change without notice. CENTOLIGHT assumes no responsibility or liability for any errors or omissions and reserves the right to revise or to create this manual at any time.
SCENIC C1027 User Manual 3 - M ounTing and igging Pay attention to safety! Please respectively consider the EN 60598-2-17 and the national standard during the installation. Only authorized technicians can carry out the installation. 3.1. Rigging The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming demolition.
4 - i nTroduCTion Scenic C1027 is a compact and lightweight LED Par designed for live events, club in- stallations and all those indoor applications where colored lights with narrow beam (20°) are required. The light source features 27x10W RGBW 4in1 LEDs, designed to create bright and intense colors.
SCENIC C1027 User Manual RGBW 4in1 color mixing Flicker-free LED emission for broadcast applications DMX-512 control with RDM 20° beam angle with advanced dimmer system and strobo effects Intelligent fan speed and control Lightweight aluminum housing with all-directional ventilation system 4.2.
POWER 3) Power Input/Output Sockets Plug the power-cord included with Scenic C1027 into an AC socket properly config- ured for this fixture. Please read “5.2. About Power Connection” on page 10 for details. This fixture is also equipped with an output power connector to be used as power mains source in case of cascade connection up to a maximum of 5 fix- tures.
SCENIC C1027 User Manual Power Input 100-240Vac - 50/60Hz 1st Unit 2nd Unit 3rd Unit 4th Unit 5th Unit 4) DMX Input/Output Sockets DMX Input is a 3-pin male XLR socket for connection to a DMX control device. DMX output is a3-pin female socket for sending the DMX control signal to other units.
SCENIC 1C1027 User Manual that provides for the easiest and most direct cabling. DMX Termonator DMX use of 3-Pin XLR Connectors INPUT OUTPUT 3-Pin XLR Unit 1 Unit 2 Last Unit Pin 1: GND Pin 2: DMX - Pin 3: DMX + DMX 512 Connect machines using shielded 2-conductor twisted pair cable with 3-pin XLR male to female connectors.
505 or 496 to have all channels controllable. Set the Scenic C1027 starting address in the 001 - 505 DMX range to enable control of up to 85 products in the 6-channel control mode. Set the Scenic C1027 starting address in the 001 - 496 DMX range to enable control of up to 56 products in the 9-channel control mode.
170-255: Lightning Strobo 6.3. Fan Noise & LED Temperature Control SCENIC C1027 is equipped with a digital processor that controls fan speed and LED temperature. Users can choose among 3 operative modes from FAN0 to FAN2 as explained in “6 - Menu Operation” on page 12.
* To contact CentoLight service, see “9 - Warranty And Service” on page 17 or visit www.centolight. ** For instruction on how to install a DMX terminator, see “5.4. DMX Terminator” on page 11.
SCENIC C1027 User Manual 8 - s PeCifiCaTion Light Source 27 x 10W LED Color System RGBW 4in1 LED Control Flicker-free Optical System 20° lens Luminance 18000 Lux @ 1m, 7700 Lux @ 2m (full color mix) Light Source Life-Cycle >...
Alternatively, you can send the product to CENTOLIGHT SERVICE CENTER – Via Enzo Ferrari, 10 – 62017 Porto Recanati - Italy. In order to send a product to service center, you need an RMA num- ber.
SCENIC C1027 User Manual 10 - W arning PLEASE READ CAREFULLY – EU and EEA (Norway, Iceland and Liechtenstein) only This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/UE) and your national law.
1 - P riMa niziare Grazie per aver acquistato il faro SCENIC C1027. Prima di iniziare, assicuratevi di leg- gere attentamente questo manuale! Esso utente è stato creato per fornire sia una panoramica dei controlli, sia informazioni su come usarli.
1.4. Limiti di Responsabilità Le informazioni e le specifiche contenute in questo manuale utente sono soggette a modifiche senza preavviso. CENTOLIGHT non si assume alcuna responsabilità per eventuali errori od omissioni e si riserva il diritto di rivedere o creare questo manua- le in qualsiasi momento.
Manuale Utente SCENIC C1027 3 - M onTaggio e PPendiMenTo Prestare attenzione alla sicurezza! Si prega di fare sempre riferimento alla direttiva EN 60598-2-17 e agli standard nazionali in fase di installazione. Solo personale autorizzato può eseguire l’installazione. 3.1. Installazione Sospesa L’installazione del dispositivo deve essere progettata e costruita in un modo che...
4 - i nTroduzione Scenic C1027 è un PAR a LED compatto e leggero pensato per eventi live, instal- lazioni in club e discoteche e tutte quelle applicazioni indoor dove sono richieste luci colorate con ampiezza del fascio piuttosto stretta (20°). Le sorgenti luminose sono 27 LED da 10W ciascuno con emissioni RGBW 4in1, concepiti per creare colori brillanti e intensi.
Manuale Utente SCENIC C1027 Fino a 34000 lux @ 1m (modalità full-color) Mix del colore RGBW 4IN1 Controllo della scansione LED flicker-free per applicazioni broadcast Controllo DMX con RDM Fascio luminoso a 20° con controllo dimmer avanzato e effetti strobo Controllo della ventola a microprocessore con selezione di varie modalità...
Manuale Utente SCENIC C1027 5 - s eTuP del ProdoTTo 5.1. Descrizione del pannello posteriore MENU DOWN ENTER Il pannello di controllo include l’area del display a LED e dei tasti di controllo. 1) Display a LED a 4 cifre Mostra la modalità...
Manuale Utente SCENIC C1027 Power Input 100-240Vac - 50/60Hz 1st Unit 2nd Unit 3rd Unit 4th Unit 5th Unit 4) Prese di ingresso / uscita DMX L’ingresso DMX è una presa XLR maschio a 3 pin per la connessione a una centrali- na di controllo DMX.
Manuale Utente SCENIC C1027 faro. Utilizzare un ordine che preveda il cablaggio più semplice e diretto. DMX Termonator Uso dei 3-Piedini nei Connettori XLR per DMX INGRESSO USCITA 3-Poli XLR Unit 1 Unit 2 Last Unit Piedino 1: MASSA Piedino 2: DMX -...
è probabile che si limiti l’accesso ad alcuni dei canali del prodot- to. Scenic C1027 utilizza 6 canali DMX o 9 canali DMX (in base alla modalità DMX scelta), che definiscono, rispettivamente, il più alto indirizzo configurabile a 505 o 496 per controllare tutti i canali possibili.
170-255: Effetto Lampo 6.3. Controllo della ventola e della temperatura del LED Scenic C1027 è dotato di un processore digitale che controlla la velocità della ven- tola e la temperatura del LED. Gli utenti possono scegliere tra 3 modalità operative da FAN0 a FAN2 come spiegato in “6 - Funzionamento dei Menu”...
* Per contattare il Servizio Assistenza Centolight, consultare il paragrafo “9 - Garanzia e Assistenza” a pagi- na 33 o visitate il sito www.centolight.com ** Per istruzione su come installare un terminatore DMX, vedere “5.4. Terminatore DMX” a pagina 27.
Manuale Utente SCENIC C1027 8 - s PeCifiChe eCniChe Sorgente Luminosa 27 x 10W LED Gestione dei Colori RGBW 4in1 Flicker-Free (scansione priva di sfarfallìo per applicazioni Controllo Led broadcast) Sistema ottico Lenti da 20° Luminanza 18000 lux @ 1m, 7700 lux @ 2m (tutti i colori-base al massimo) Durata LED >...
9 - g aranzia e ssisTenza Tutti i prodotti CENTOLIGHT sono coperti da garanzia di due anni. Essa è valida dalla data di acquisto, come indicato dal documento di acquisto. I seguenti casi/ componenti non sono coperti dalla garanzia di cui sopra:...
Manuale Utente SCENIC C1027 10 - a see (n vviso orvegia slanda ieChTensTein LEGGETE ATTENTAMENTE - Questo simbolo indica che il prodotto non deve essere smaltito con i rifiuti domestici, in base alla direttiva RAEE (2202/96/CE) e legislazio- ne nazionale.
Page 35
Questo prodotto viene importato nella UE da FRENEXPORT SPA – Via Enzo Ferrari, 10 - 62017 Porto Recanati - Italy CentoLight® is a registered trademark of FRENEXPORT SPA - Italy CentoLight® è un marchio di fabbrica registrato di FRENEXPORT SPA - Italia...