Instructions For Use - NCTeco NG-RV1100 User Manual

1. Power Switch:
1) Turn "ON", after flashing white light, will hear " POWER ON", and then it works.
2) Turn "OFF", cut off the power supply, which mean it's shutdown completely.
2. ON/OFF key
1) In the power-off state, long press for 3 seconds, after flashing white light and hear
"POWER ON", the boot is completed.
2) ln the power-on state, long press
goes out, and the voice announces "POWER OFF".
3. Sweeping/Pause:
After working, press or use the Mobile APP to start the automatic cleaning or pause
function.
Note:
1) Sweeping robot cannot be used to clean liquid.
2) If the power is lower than 20%, the cleaning task cannot be performed, please charge
first and then continue cleaning, being lower than 20% during the cleaning process,
the device will automatically recharge.
3) Please remove all kinds of wires on the ground before cleaning.
4. Recharge:
Start or control the recharge from the mobile APP, the white breathing light will be
always on when the machine is charging.
Note:
- If the charging base is not found, the host will automatically return to the starting
position.
- Please manually put the host back on the charging stand.
5. Suction Adjustment:
Use the remote control or Mobile APP to choose three suction modes: quiet, normal,
strong (Default is normal).
6. Water Regulation (in tank mode):
Using the Mobile APP or remote control, you can choose three water volume modes: low,
medium or high (Default is mid-range).
7. Silent Mode:
Turn on the silent mode, the device will not play the voice, you can use the Mobile APP
or remote control to turn ON or OFF the silent mode.
8. Reset Wi-Fi:
When the router's configuration, password or other reasons cause the mobile phone to
fail to connect to the machine, please press
''Wi-Fi resetting'' sounds and Wi-Fi light turns white and flashes quickly, indicating that the
reset is successful.
9. Schedule a cleaning:
Use the mobile APP to set the scheduled cleaning time, the host will automatically start
cleaning at the specified time.
Note: During work, do not move the device at will and frequently.

Instructions for Use

(Note: Turn power switch to "ON" to turn on the power status):
for 8 seconds, the red light flashes quickly and then
and hold for 3 seconds till hearing the
10