Luminex GigaCore 30i User Manual page 20

3 | confIGuratIon
(D) PSU's: On the right-hand side of the switch image, two icons indicate the status of the installed PSU's.
(E) Navigation menu
(F) Theme and language: Select here if you want to use the dark or light theme.
(G) Help: In case you need help, here you find an on-board help file.
(H) Port status: This table gives you a quick overview of the port settings.
(I) IP Settings: Find here all the network settings of the switch. These parameters can be modified in the
(J) System info: Find here all the information of the device such as system identifier, device name, system
(K) Active profile: In this area, the current active profile of the GigaCore is being displayed.
20
Here is a list of the icons, the possible colours, and the meaning of each colour:
Non PoE models
Green
Orange
Red
Green
Orange
Orange
Grey
PoE models
Green
Orange
Red
Green
Orange
Green
Orange
Orange
Grey
Green
Orange
Red
Interface supported languages are English, Japanese and Chinese for now.
device settings menu.
description, MAC address, serial number, and current firmware version. This information can be
modified in the device settings menu.
PSU present and online.
PSU present but not powered (only when 2x PSU are fitted).
PSU error.
PSU redundancy configured and active.
PSU redundancy configured but not available.
Warning.
No PSU present.
PSU present and online.
PSU present but not powered.
PSU error.
PSU redundancy configured and active.
PSU redundancy configured but not available.
PSU sharing configured and active.
PSU sharing configured but not available.
Warning.
No PSU present.
Non PoE capable PSU present and online.
Non PoE capable PSU present but not powered (only when 2x PSU are fitted).
PSU error.