Muting An Alert; Auto Mute Mode; Auxiliary Audio Jack; Notice - Cobra XRS 9645 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer Warranty

Muting an Alert

Assistance
Your detector allows you to quickly turn Off an Audio Alert by momentarily
pressing the Program/Mute button. If you press the Program/Mute button
a second time during the Alert, the Audio Alert will be turned back On.
Secondary Icons
Program/Mute Button
Press and release
To Turn On or Off an Audio Alert Using the Program/Mute Button

Notice

Press and release
Tone Visual Display
the Program/Mute
None None
button.

Auto Mute Mode

Auto Mute will automatically reduce the audio volume of all alerts after four (4)
seconds for as long as the signal is detected. The factory setting for Auto Mute is On.
To Turn Auto Mute On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
Tone Visual Display
go to Auto Mute.
Two beeps Auto Mute On
One beep Auto Mute Off
Auto Mute On Auto Mute Off
AutoMute AutoMute
On Off

Auxiliary Audio Jack

The Auxiliary Audio Jack can be
used to connect an external speaker
in environments with high ambient
noise levels. The internal speaker
will be disconnected.
12 English
Settings
Your Detector
Intro Operation Customer Warranty
Main Icons
IntelliMute Assistance
IntelliMute is a unique feature that allows you to avoid alerts you don't need to
hear because you are stopped or moving slowly. By sensing the "revs" RPMs)
of your engine, IntelliMute knows when you are at low speed and automatically
mutes audio alerts (except for strobe signals from emergency vehicles).
Secondary Icons
Intro Operation Customer Warranty
Assistance
Before IntelliMute will work, you must set an activation point for your engine's
revs (see page 14). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
each time the power is turned On. An i will appear in the display when
Secondary Icons
Notice
IntelliMute is On. The factory setting is IntelliMute Off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
Notice the engine's revs. In such cases, you can reduce unwanted audio alerts
by using Auto Mute and City mode when appropriate.
To Turn IntelliMute On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode, Tone
go to IntelliMute.
Two beeps
One beep
IntelliMute On
Intelli
Mute
On
Auxiliary
Audio Jack
N W
Visual Display
IntelliMute On,
then i appears in the display
IntelliMute Off
IntelliMute Off
Intelli
Mute
Off
i h
Nothing Comes Close to a Cobra ® 13