Pop Alert; K, Ku And X Band Detection - Cobra XRS 9645 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer Warranty
Assistance
Select/Dim Button
Secondary Icons
Program/Mute Button
To Calibrate the Compass Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode, go to
Tone
Set Compass. Notice
None
Press and release the Set/City button One beep
to begin setting the compass.
Within two minutes, drive your Three beeps
vehicle in a circle twice, then press
the Set/City button again.
in Icons
Press and release either the Select/Dim None
button to proceed to the next user
mode or the Program/Mute button
to exit Program mode.
Intro Operation Customer Warranty
Assistance
Set Compass Calibrate Compass Compass Set
Set Compa... Drive in... Compass
condary Icons
Press SET... Set!
NOTE
If you do not press the Set/City button within two minutes after beginning
Notice
the set compass process, compass calibration will automatically terminate.
Tone Visual Display
One beep Compass not set...
Please try again...
18 English
Your Detector
Intro

Pop Alert

The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature
Set/City
of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses
Button
a single, short-time pulse to measure the target vehicle's speed.
Secondary Icons The Pop mode receiver senses Pop singles beyond the effective range of
Pop radar guns. As the Pop mode receiver is so sensitive, you should limit
the use of Pop Detect mode to highway and rural driving.
Pop Alert will alert you to Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect Off.
Visual Display
Set Compass
To Turn Pop Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
Drive in 2 circles...
Press SET when In Program mode,
done...
go to Pop Detect.
Compass Set!
For two seconds
followed by direction

K, Ku and X Band Detection

of travel (N, NE, E,
The new Ku Band may be introduced to North America in the future. To prevent
SE, S, SW, W or NW)
false alerts until it is, the factory default for Ku Band detection is Off. In parts of
None
North America, annoying false alerts from door openers and similar devices are
triggered on the X Band and K Band. If desired, X Band or K Band can be turned
Off. The factory default for X Band and K Band detection is On.
To Turn X, K and/or Ku Mode On or Off Using Program Mode
Direction of Travel
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
N W h
go to X, K or Ku band.
X-Band On
X-Band On
X-Band Off
X-Band Off
Terminate
Com pa ss n .. .
K-Band On
Pl ease t r. .. K-Band On
Settings
Operation Customer Warranty
Assistance
Notice
Tone Visual Display
Two beeps Pop On
One beep Pop Off
Tone Visual Display
Two beeps X-Band On
One beep X-Band Off
Two beeps K-Band On
One beep K-Band Off
Two beeps Ku-Band On
One beep Ku-Band Off
K-Band Off Ku-Band On Ku-Band Off
K-Band Off Ku-Band On Ku-Band Off
Nothing Comes Close to a Cobra
Pop Detect On
Pop On
Pop Detect Off
Pop Off
® 19