Cobra XRS 9670 Instruction Booklet

Important Compass Information
For The XRS 9670
Your Detector

Turning On and Calibrating Your Compass

default for Compass is off.
Program/Mute Button
Select/Dim Button

To Calibrate The Compass

Before calibrating compass, select the location where the detector will be mounted.
Set/City
* Drive your vehicle in two complete circles. A large parking lot is the most convenient place to do this. Please be careful when
making the circles and watch for other traffic. It does not matter what direction your vehicle is pointing when you start the circles,
which direction you go to make the circles, and it does not have to be exactly two circles. You do NOT have to make perfect circles.
You can drive in any pattern, as long as you make two complete turns. Four three-point turns, two small squares, or any two
complete loops will work as well as two circles. It does not matter what size the circles are, if your speed is constant, or how fast
you make the circles [but less than two minutes].
Will I need to calibrate the compass every time I use my radar detector?
My compass sometimes seems to give a wrong direction – what is wrong?
The compass will show — — until it is calibrated The factory
Program/Mute
Select/Dim
Set/City
Tone
Set/City
Button
Visual Display
Program
Set Compass
Drive in 2 circles...
Press SET when
done...
Compass Set!