Mesh Settings For Mesh Mode - Draytek VigorAP 906 User Manual

II-4 Mesh Settings for Mesh Mode
When you choose Mesh as the operation mode, the Mesh menu with the settings of Mesh Setup,
Mesh Status, Mesh Discovery, Configuration Sync, Support List, and Mesh Syslog will be shown on
the screen.
Please note that, within the VigorMesh network,
the total number allowed for mesh nodes is 8 (including the mesh root)

the maximum number of the hop is 3

Refer to the following figure:
For the mesh group set within the VigorMesh network,
63