Create from Wireless
Neighbor Table
Create from ARP Table
Set to Factory Default
Index
MAC
Name
In addition to choosing from the wireless station table, neighbor table, or ARP table, you can click
any index number link to create a new device object profile by entering the name and MAC address
manually.
Choose the one(s) you want and click OK. The selected entries will be
listed on the Device Object Profiles.
Click the link to open the following page.
Choose the one(s) you want and click OK. The selected entries will be
listed on the Device Object Profiles.
Click the link to open the following page.
Choose the one(s) you want and click OK. The selected entries will be
listed on the Device Object Profiles.
Click it to return to the factory default setting and remove all the
device object profiles.
Display the index number of the device object profile.
Display the MAC address specified by the device object profile.
Display the name of the device object profile.
129