Draytek VigorAP 906 User Manual page 72

It must be composed by "1" Mesh Root and "0~7" mesh nodes

(Roaming) Normally members in a mesh group use the same Wireless SSID/security

(Add) Only the mesh root can add a new mesh node into the mesh group

(Recover) A disconnected mesh node will automatically try to connect to another connected

mesh node of the same group
Mesh Root and Mesh Node
Mesh Root indicates that VigorAP would be another AP's uplink connection. As a Mesh Root, VigorAP
must connect to a gateway with an Ethernet cable first to have an internet connection.
As a Mesh Node, VigorAP can connect to the mesh root or mesh node within the same mesh group
via a wireless network or physical connection with an Ethernet cable.
The following figure shows how VigorAP runs as MESH ROOT:
The following figure shows how VigorAP runs as MESH NODE:
64