Six Series Integral Style Flow Meters - Sage RIO SIX Instruction Manual

O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
SIX Series Integral Style Mass Flow Meters
1,3
IN-LINE STYLE
150#, 300#, or 600# flanged ends are optionally available.
(150# flanges recommended on 3" and 4" Flow Bodies)
6.75
Between
3.3" and 4.75"
FLOW
See Chart
2
INSERTION STYLE
150#, 300#, or 600# flanged mounting is optionally avail-
able. Available probe lengths are 6", 12", 15", 18", 24", 30" or
36". Standard probe is 1/2" diameter.
5.03
6.75
FLOW
5.03
3/4" NPT for User Entry
(ONE ON EACH SIDE)
The plug(s) is to be replaced with an
Approved explosion proof cable
gland/strain relief. End user is also
responsible for providing ATEX Zone 1
approved cable for power and signal
6.78 Depth
CAUTION:
Do not rotate the Enclosure of
In-Line Style Meters relative to
the Flow Tube, or the calibration
may be effected since the sensors
may become misaligned.
3/4" NPT for User Entry
(ONE ON EACH SIDE)
The plug(s) is to be replaced with an
Approved explosion proof cable
gland/strain relief. End user is also
responsible for providing ATEX Zone 1
approved cable for power and signal
:
vailable probe lengths
6", 12", 15", 18", 24" & 36"
S A G E M E T E R I N G , I N C .
Depth: DC Enclosure depth is 4.35"
1 NPT Fittings standard
2 Flanged Mounting available for high pressure operation
33
AC Enclosure depth is 5.35"
REV. 10-SIX/SRX