Sip Series Integral Style Flow Meters - Sage SIP Operation And Instruction Manual

O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
SIP Series Integral Style Mass Flow Meters
1,3
IN-LINE STYLE
150#, 300#, or 600# flanged ends are optionally available.
(150# flanges recommended on 3" and 4" Flow Bodies)
4.61
5.38
2-3/4" Nominal
FLOW
See Chart
2
INSERTION STYLE
150#, 300#, or 600# flanged mounting is optionally avail-
able. Available probe lengths are 6", 12", 15", 18", 24", 30",
36" or 48". Standard probe is 1/2" diameter (3/4" optional –
recommended for 36" or 48")
1/2" NPT
User Entry
for Wiring
FLOW
1/2" NPT
User Entry
for Wiring
4.60
4.50
Probe Length
S A G E M E T E R I N G , I N C .
CAUTION:
Do not rotate the
Enclosure of In-Line
Style Meters relative
to the Flow Tube, or
the calibration may
be effected since the
sensors may become
misaligned.
Depth: DC Enclosure depth is 4.35"
1 NPT Fittings standard
2 Flanged Mounting available for high pressure operation
3 Flow Conditioning built in to Flow Meter Pipe Sizes 1/2" and up. Contact Sage for optional
1/4" tube flow body.
35
AC Enclosure depth is 5.35"
REV. 16-SIP/SRP