Configuring Windows 98 And Me Pcs - Linksys USBVPN1 User Manual

3. Select Internet Protocol (TCP/IP), shown in Figure 5-5, and click the
Properties button.
4. Select Obtain an IP address automatically in both places, as shown in
Figure 5-6, and click the OK button. Click the OK button again to complete
the PC configuration.
5. Restart your computer.
Go to "Chapter 6: Configure the Adapter."
24
Instant Broadband
Figure 5-5
Figure 5-6
® Series USB VPN & Firewall Adapter
Configuring Windows 98 and Millennium PCs
1. Go to the Network screen by clicking the Start button. Click Settings and
then Control Panel. From there, double-click the Network icon.
2. On the Configuration tab, shown in Figure 5-7, select the TCP/IP line for
the USB VPN & Firewall Adapter. Do not choose a TCP/IP entry whose
name mentions DUN, PPPoE, VPN, or AOL. If the word TCP/IP appears
by itself, select that line. (If there is no TCP/IP line listed, refer to
"Appendix F: Installing the TCP/IP Protocol" or your Ethernet adapter's
user guide to install TCP/IP now.) Click the Properties button.
Figure 5-7
25