Configuring Windows 2000 Pcs - Linksys USBVPN1 User Manual

3. Select Internet Protocol (TCP/IP), as shown in Figure 5-2, and click the
Properties button.
4. Select Obtain an IP address automatically. Once the new window Select
Obtain an IP address automatically in both places, as shown in Figure 5-
3, and click the OK button. Click the OK button again to complete the PC
configuration.
5. Restart your computer.
Go to "Chapter 6: Configure the Adapter."
22
Instant Broadband
Figure 5-2
Figure 5-3
® Series USB VPN & Firewall Adapter

Configuring Windows 2000 PCs

1. Go to the Network screen by clicking the Start button. Click Settings and
then Control Panel. From there, double-click the Network and Dial-up
Connections icon.
2. Select the Local Area Connection icon for the applicable Ethernet adapter
(usually it is the first Local Area Connection listed). Double-click the Local
Area Connection. (See Figure 5-4.) Click the Properties button.
Figure 5-4
23