Chapter 5: Installation And Configuration For Windows 98, Me, And 2000; Overview; Software Installation For Windows 98, Me, And 2000 - Linksys WPC55AG User Manual

3. If WEP is enabled, the
screen in Figure 4-7 will
appear. Enter the WEP
key of your wireless net-
work in the Network key
field, and re-enter it in the
Confirm network key
field. Then click Connect,
and go to Step 4.
4. The screen in Figure 4-8
will appear if your con-
nection is active.
For more information about wireless networking on a Windows XP computer,
click Start and then Help and Support. Enter the keyword wireless in the
field provided, and press the Enter key.
Congratulations! The installation of the Dual-Band Wireless A+G
Notebook Adapter is complete.
8
Figure 4-7
Figure 4-8
Chapter 5: Installation and
Configuration for Windows 98, Me,
and 2000
Important for Windows XP users: Go to "Chapter 4: Installation
and Configuration for Windows XP."

Overview

The Dual-Band Wireless A+G Notebook Adapter Setup Wizard will guide you
through the installation and configuration procedure for Windows 98, Me, and
2000. Then you will install the Adapter in your computer.

Software Installation for Windows 98, Me, and 2000

1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup
Wizard should run automatically, and Figure 5-1 should appear. If it does
not, click the Start button and choose Run. In the field that appears, enter
D : \ s e t u p . exe
(where "D" is
the letter of
your CD-ROM
drive).
• Install - Click the Install button to begin the software installation process.
• User Guide - Clicking the User Guide button opened this PDF file of this
User Guide.
• Exit - Click the Exit button to exit the Setup Wizard.
Figure 5-1
9