Bosch Professional GPB 18V-2 C Original Instructions Manual page 15

Construction site radio
Max. Bluetooth® transmission power
Button cell (back-up battery)
A)
Protection rating
Recommended ambient temperature during charging
Permitted ambient temperature during operation
during storage
Recommended rechargeable batteries
Recommended chargers
A) When the battery cover (12) and connector compartment (16) are closed
B) Limited performance at temperatures <0 °C
Power supply
Article number
Input voltage
Input AC frequency
Input current
For additional technical data, visit: https://www.bosch-professional.com/ecodesign
Radio Energy Supply
Energy can be supplied to the radio via a lithium-ion re-
chargeable battery (18) or via the power supply (21).
Operation with Battery Pack
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion re-
chargeable battery of your radio.
Note: The use of rechargeable batteries unsuitable for your
radio can lead to malfunctions or damage to the radio.
The lithium-ion battery is protected against deep discharge
by "Electronic Cell Protection (ECP)". A protective circuit
switches the radio off when the rechargeable battery is
drained.
Do not switch the radio back on after it has been
u
switched off by the protective circuit. This can damage
the battery.
Replacing a Rechargeable Battery
Disengage the locking lever (13) of the battery cover and
open the battery cover (12) flap.
To remove a rechargeable battery, press the battery release
button (17) and pull the rechargeable battery out of the bat-
tery compartment. Do not use force to do this.
To insert a rechargeable battery, push it into the battery
holder (15) such that the connections of the rechargeable
battery are in line with the connections of the battery holder.
Allow the rechargeable battery to engage.
Close the battery cover (12) and lock it.
Bosch Power Tools
mW
°C
B)
and °C
Power supply
1 619 PB4 ... Output voltage
Output current
V~ 100−240
Hz 50−60 Weight according to
EPTA-Procedure 01:2014
mA 800
Protection class
To insert particularly large rechargeable batteries, the bat-
tery cover (12) can be removed. To do this, open the battery
cover. Press the spring elements (14) of the attachment
against each other and remove the battery cover.
Please note that, without the battery cover, the re-
chargeable battery and battery compartment are no
longer protected against moisture and dirt. Reattach the
battery cover as soon as you have removed the large re-
chargeable battery.
Battery Charge Indicator
When the rechargeable battery is inserted, you can see the
state of charge of the battery (18) in the display. When the
rechargeable battery is removed, you can see this on the
battery itself.
Battery Charge Indicator in the Display
The battery charge indicator (i) will appear in the display as
soon as a rechargeable battery with sufficient voltage is in-
serted and the radio is not connected to the mains supply via
the power supply (21).
Display
GPB 18V-2 C
7.94
CR 2032
3 V lithium battery
IP 54 (dust and splash- IP 54 (dust and splash-
proof)
0 to +35
−20 to +40
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
V=
A
kg
Capacity
80−100 %
60−80 %
40−60 %
20−40 %
5−20 %
1 609 92A 5NG | (27.05.2020)
English | 15
GPB 18V-2 SC
7.94
CR 2032
3 V lithium battery
proof)
0 to +35
−20 to +40
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
18
1.8
0.21
/Ⅱ