Linksys LNE100M User Manual page 34

IEEE 802.3
Shown in Figure 11-16, the "IEEE 802.3" statistics are as follows:
Frames Rx with Alignment Error This shows the amount of packets received
Frames Tx with one Collision
Frames Tx with
more than one Collision
Frames Tx after Deferral
Frames Tx Fail (Max Collision) This shows the number of frames not trans-
Frames Rx Fail (Overrun)
Frames Tx Fail (Underrun)
Frames Tx without detection
of the collision-detect heartbeat This shows the number of frames success-
Frames Tx CRS Lost
Late Collisions on Frames Tx
59
Instant EtherFast
with frame alignment errors.
This shows the amount of frames transmitted
that have received an initial collision with
other frames.
This shows the amount of frames transmitted
that have received multiple collisions with
other frames.
This shows the number of frames success-
fully transmitted after the Adapter defers
transmission at least once.
mitted due to excessive collisions.
This shows the number of frames not
received due to overrun errors on the
Adapter.
This shows the number of frames not trans-
mitted due to underrun errors on the
Adapter.
fully transmitted without detection of the
collision-detect heartbeat.
This shows the number of times the CRS
signal has been lost during packet transmis-
sion.
This shows the number of collisions detect-
ed after the normal window.
Series EtherFast ®
®
10/100 Managed Network Adapter
Figure 11-16
Figure 11-17
60