Overview; Installing The Adapter's Driver - Linksys LNE100M User Manual

Chapter 6: Manual Installation and
Setup for Windows Me

Overview

After physically installing the Adapter in your computer, follow these instruc-
tions to manually install the network device driver. If at any time during the
installation you encounter problems, consult the Troubleshooting section.

Installing the Adapter's Driver

1. Start up your PC in Windows Me.
2. Windows Me will automatically detect the presence of the PCI Ethernet
Controller hardware in your PC.
3. Insert the Setup Utility CD into your CD-ROM drive while the Add New
Hardware Wizard window, shown in Figure 6-1, is visible. Click the Specify
the location of the driver (Advanced) radio button. Click the Next button.
19
Instant EtherFast
Figure 6-1
® Series EtherFast ®
4. Click the Search for the best driver for your device (Recommended)
radio button and select Specify a location. Type D:\drivers in the drop-
down box and click the Next button.
5. A window will open, notifying you that Windows is searching for the
EtherFast 10/100 Managed Network Adapter driver. When the window noti-
fies you that it is ready to install the driver, as shown in Figure 6-3, click
the Next button.
10/100 Managed Network Adapter
Figure 6-2
Figure 6-3
20