Statistics Tab - Linksys LNE100M User Manual

Statistics Tab

The Statistics Tab will show how, in a smaller screen, the Adapter is function-
ing. This tab consists of three sub-tabs: General, IEEE 802.3, and Others. These
are described in this section.
GENERAL
Shown in Figure 11-15, the "General" statistics are as follows:
Frames Tx OK This shows the amount of frames transmitted successfully.
Frames Rx OK This shows the amount of frames received successfully.
Frames Tx Fail This shows the amount of frames transmitted that did not
reach the destination successfully.
Frames Rx Fail This shows the amount of frames that were not received
correctly.
Rx No Buffer This specifies the number of frames that the Adapter can-
not receive due to lack of receive buffer space.
57
Instant EtherFast
Figure 11-15
EtherFast ®
Series
®
Directed Bytes Tx
Directed Frames Tx
Multicast Bytes Tx
Multicast Frames Tx This is the amount of frames transmitted across the net-
Broadcast Bytes Tx
Broadcast Frames Tx This is the amount of frames transmitted across the net-
Directed Bytes Rx
Directed Frames Rx
Multicast Bytes Rx
Multicast Frames Rx This is the amount of frames received across the net-
Broadcast Bytes Rx
Broadcast Frames Rx This is the amount of frames received across the net-
Rx CRC Error
Tx Packets Queued
10/100 Managed Network Adapter
This is the amount of bytes transmitted across the net-
work to one node.
This is the amount of frames transmitted across the
network to one node.
This is the amount of bytes transmitted across the net-
work to several nodes.
work to several nodes.
This is the amount of bytes transmitted across the net-
work to all nodes.
work to all nodes.
This is the amount of bytes received across the network
from one node.
This is the amount of frames received across the net-
work from one node.
This is the amount of bytes received across the network
from several nodes.
work from several nodes.
This is the amount of bytes received across the network
from all nodes.
work from all nodes.
This shows the amount of incoming packets that failed
the cyclical redundancy check.
This shows the amount of packets scheduled to be
transmitted based on queue configuration.
58