Overview; Installing The Adapter's Newest Driver - Linksys LNE100M User Manual

7. The Completing the Found New Hardware Wizard dialog box will appear,
as shown in Figure 8-6. Click the Finish button to complete the installa-
tion.
8. Remove any disks from your drives.
The Windows 2000 driver installation is complete. If you want to share
files or printers, refer to your Windows 2000 documentation.
39
Instant EtherFast
Figure 8-6
Series
® EtherFast ®
Chapter 9: Manual Installation and
Setup for Windows XP

Overview

After physically installing the Adapter in your computer, follow these instruc-
tions to manually install the network device driver. Windows XP has a driver
for the Adapter. After physically installing the Adapter into your PC, Windows
XP will automatically install the Adapter's driver.
If you want to use the new driver on the Setup Utility CD, you must update the
driver for this device as shown in this chapter.

Installing the Adapter's Newest Driver

1. Power up your PC and start
Windows XP.
2. Insert the Setup Utility
CD-ROM. The Found
New Hardware Wizard
screen will appear, as
shown in Figure 9-1.
Select Install from a
list or specific loca-
tion (Advanced), and
click Next to continue.
10/100 Managed Network Adapter
Figure 9-1
40