2,4 ghz 802.11g wireless-g usb network adapter with speedbooster (135 pages)
Summary of Contents for Linksys WGA600N
Page 1
QUICK INSTALLATION GUIDE Dual-Band Wireless-N Gaming and Video Adapter Internet Connection Kit WET610N Model: Special Instructions for DIRECTV Customers Please use this guide for installation. Disregard the “Start Here” envelope in the Cisco box.
WET610N Overview The Internet Connection Kit creates a wireless connection between your wireless router and your DIRECTV® Receiver, so your DIRECTV Receiver can access the Internet . Your DIRECTV Receiver has been customized to work with the Cisco Dual-Band Wireless-N Gaming and Video Adapter to enable the DIRECTV on DEMAND and TV Apps services .
Connection Before you begin the installation of the Adapter, make sure your DIRECTV Receiver and TV are on . Also make sure you can connect to the Internet through your wireless router and computer . Plug the power adapter into the power port of the Adapter .
Page 7
WET610N Connect the other end of the included network cable to the Ethernet port on the back of your DIRECTV Receiver . (If your DIRECTV Receiver has two ports, connect the cable to the top port .) NOTE 3: If you use an Ethernet switch to connect your devices, then follow these instructions: 1 .
Setup The TV automatically displays instructions to follow . Use the Select button on your DIRECTV Remote Control to make your choices . Within 60 seconds, the TV should ask if you want to configure the Adapter . Select Set Up Now to continue . Troubleshooting Tip: If the Wireless Adapter Found screen does not appear within 60 seconds, unplug the Adapter from your DIRECTV receiver for ten seconds, and then plug it back in .
Page 9
WET610N Advanced Users: NOTE 4: If you are not an advanced user, proceed to step C on page 6 . If you are using a hidden wireless network name (SSID), then select Enter Name, and follow these instructions: Enter your hidden network name (SSID), and then select OK .
Page 10
If your network does not use wireless security, then proceed to step E . If your network uses wireless security, then use the number keypad on your DIRECTV Remote Control to enter the security key . Refer to Note 5 (previous page) for help .
Page 11
WET610N The DIRECTV Receiver is connected to the Internet . To proceed, select Continue . If you do not see the Congratulations screen, please visit directv.com/ondemand for troubleshooting support . Please read the information on the screen . Then select Done . Congratulations, setup is complete and you are now connected to DIRECTV on DEMAND and TV Apps.
Wi-Fi Protected Setup Use Wi-Fi Protected Setup to create a wireless connection between the Adapter and your router . IMPORTANT: “Setup”, then you do not need to follow the instructions in this section, “Wi-Fi Protected Setup” . Your setup is complete . NOTE 7: The Adapter should be powered on but not connected to the DIRECTV Receiver .
Page 13
WET610N Connect one end of the network cable to the Ethernet port of the Adapter . Connect the other end of the included network cable to the Ethernet port on the back of your DIRECTV Receiver . (If your DIRECTV Receiver has two ports, connect the cable to the top port .) Wait until the Ethernet light of...
Page 14
To verify connection to the Internet, press the Menu button on your DIRECTV Remote Control . Go to Parental, Fav’s & Setup > System Setup > Network > Repeat Setup . To proceed, select Continue . When the DIRECTV Receiver is connected to the Internet, the Congratulations screen appears .