Table of Contents
Advertisement
Operating Instructions
Operating Precautions
Shoot under the proper lighting
conditions.
To produce pictures with eye-pleasing
colors, shoot under the proper lighting
conditions. The pictures may not appear with
their proper colors when shooting under
fluorescent lights. Select the proper lighting
as required.
To ensure a stable performance
in the long term
Using the unit for prolonged periods in
locations where the temperature and
humidity levels are high will cause its parts to
deteriorate, resulting in a reduction of its
service life. (Recommended temperature:
o
Max. 35
C (95 °F))
Ensure that a cooling unit or heating unit will
not blow any air directly toward the
installation location.
Do not point the camera at
strong lights.
When parts of the MOS sensor are exposed
to spotlights or other strong lights, blooming
(a phenomenon where the edges of strong
lights become blurred) may occur.
What happens with
high-brightness subjects
Flare may occur if an extremely bright light
source is pointed at the lens. In a case like
this, change the angle or take some other
remedial action.
When using the automatic
functions
In the [Scene] such as the camera menu, the
initial settings on some items has been set to
auto, making it impossible for these items to
be operated manually. To operate them
manually, switch from the auto settings to
the manual settings as required.
When using the ATW (auto tracking white
adjustment) function under fluorescent
lights, the white balance may vary.
Operating temperature range
Avoid using the unit in cold locations where
the temperature drops below 0
hot locations where the temperature rises
o
above 40
C (104 °F) since these
temperatures downgrade the picture quality
and adversely affect the internal parts.
Also, it may take a few minutes to stabilize
the image when used in low temperatures.
We recommend that you turn on this unit
before use.
Concerning the HDMI interface
standard
This unit has been certified as
HDMI-compatible, but on rare occasions
images may not be displayed depending on
the HDMI device which has been connected
to the unit.
67
o
C (32 °F) or
Advertisement
Table of Contents
