Table of Contents
Advertisement
Standard serial communication support
Connect up to seven cameras to a
commercially available controller via
RS-232C interface.
Integrated pan-tilt head unit, camera and
lens to facilitate installation
By designing the camera, lens and pan-tilt
head as a single integrated unit, the time
taken for the installation work has been
drastically reduced.
Use of easy-to-operate wireless remote
control (optional accessory) is possible
A wireless remote control capable of
operating up to four units can be used.
It can easily be used to set the various
functions or switch between them while
viewing the menu screens.
Flexible camera layout enabled by simple
connection and installation
The unit features excellent connectivity
and installability thanks to the IP control; a
lightweight main unit, and the turn-lock
mechanism, which enables the user to
install it on his or her own (only when used
indoors).
[Note]
Bear in mind that the unit is designed to be
used indoors only: It cannot be used
outdoors.
The compact camera unit realizes
space-saving installation. The unit is
suitable for replacing an existing camera
or for expanding the current system.
Use in online meetings
The unit supports UVC so the video and audio
signals can be output over USB. By using the
PTZ virtual USB Driver software and
connecting with a LAN cable, it is possible to
use the unit as a usb camera.
High degree of compatibility with Panasonic's
currently available controllers, enabling a
flexible system to be put together
A maximum of five units can be operated by
serial control from one of Panasonic's
currently available controllers (AW-RP60,
AW-RP150).
The unit can also be used together with the
cameras and pan-tilt head unit systems currently
available from Panasonic Connect Co., Ltd. so
that an existing system can be used to advantage
to put together a system that is even more
flexible.
[Note]
It may be necessary to upgrade the version
of the controller in order to support the unit.
The maximum distances between the units
and controller is 1000 meters (3280 ft).
(when serial control is exercised)
Use of an external device or some other
means must be provided separately in order
to extend the video signal connections.
PoE+ *1 eliminates need for camera power
configurations
Configurations for camera's power supply
are not necessary when the unit is connected
to a network device that supports the PoE+
standard (IEEE802.3at compliant)*2.
[Note]
If the AC adaptor and a PoE+ power
supply are connected simultaneously, the
AC adaptor will have priority.
Use a category 5e cable or higher
when using a PoE+ power supply.
The maximum length of the cable between
the power supply unit and the unit is 100
meters (328 ft). Using a cable that is lower
than category 5e may result in reduced
power supply capabilities.
*1: Power over Ethernet Plus.
Referred to as "PoE+" in this manual.
*2: For details on PoE+ power supply devices for
which operation has been verified, consult
your local dealer.
62
Advertisement
Table of Contents
