Table of Contents
Advertisement
When using the WV-Q105A (optional accessory)
It is recommended that you provide an inspection opening or other such space for access purposes in
the area near where the equipment is installed in order to facilitate installation and the wiring
connections work.
Before mounting the mount bracket, check that the installation location is strong enough to withstand
the total mass (approx. 2.32 kg [5.15 lb]) which will be exerted once the camera is mounted.
When installing the unit on a ceiling, ensure that there is at least 100 mm (3-15/16 inches) of space
above the ceiling panel in the place where the unit will be used.
The unit can be installed on a ceiling panel with a thickness ranging from 5 mm (3/16 inches) to 40 mm
(1-9/16 inches). The drop-prevention wire (supplied with the WV-Q105A) must be used when mounting
the direct ceiling mount bracket.
(Withdrawal strength: 227.51 N {23.2 kgf} or more)
19
Advertisement
Table of Contents
