Installation - Toro Multi-Pro 5800 Installation Instructions Manual

Installation

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
Description
No parts required
No parts required
Wire Harness
Grommet
Worklight mount
Support channel
Flange-head bolt (3/8 x 2-1/4 inches)
Spacer
Flange locknut (3/8 inch)
Worklight
Flange-head bolt (1/4 x 3/4 inch)
Flasher module (CE)
Flange locknut (1/4 inch)
Cable tie
Horn switch
Jam nut (5/8 inch)
Knurled nut (5/8 inch)
Button
Switch—rocker (on-off-on)
Switch—rocker (illuminated)
Turn-signal switch
Hose clamp
Horn assembly
Flange-head bolt (3/8 x 1 inch)
Flange locknut (3/8 inch)
Cable tie
Speed decal
Speed sign
Flange-head bolts (5/16 x 3/4 inch)
Flange locknuts (5/16 inch)
License-plate light
Screw (#10 x 5/8 inch)
Locknut (#10)
Taillight bracket
Flange-head bolt (5/16 x 1 inch)
Flange locknut (5/16 inch)
Rear taillamp
Cable tie
Data plate
Rivet
Qty.
–
Prepare to install the kit.
Remove the undercarriage shroud and
–
heat shield.
1
1
2
1
Assemble the worklight and wire
harness.
4
4
4
2
1
1
1
2
1
1
Install the wire harness for the switches.
1
1
1
1
1
1
1
1 Assemble the horn.
1
5 Install the wire harness to the chassis.
3
1
Install the license plate brackets and
speed signs.
2
2
1
1 Install the license plate light.
2
1
4
4 Assemble the taillights.
2
3
1
Install the data plate
4
2
Use