Replacing Fuses - Toro Multi-Pro 5800 Installation Instructions Manual

Replacing Fuses

Replacing the Taillight Fuse
Figure 77
Note:
Your machine has separate fuses for the left
and right taillights.
1. Remove the cover from the fuse socket
78).
Figure 78
1. Cover
2. Fuse
2. Remove the open fuse
3. Insert the new fuse into the socket until the fuse
is fully seated (Figure
Note:
Use only a fuse that is rated for the same
current load as the fuse that you are replacing.
4. Assemble the cover onto the fuse socket
78).
g208461
(Figure
g037018
3. Fuse socket
(Figure 78).
78).
(Figure
Replacing Fuse Block Fuse
The electrical system is protected by fuses, and
requires no maintenance. If a fuse blows, check the
component or circuit for a malfunction or short.
1. Pull out the open fuse.
2. Replace the open fuse with a new fuse
79).
Note:
Ensure that the correct-size fuse is
installed.
1. Fuse
31
Figure 79
2. Fuse slot
(Figure
g208457