Table of Contents
Advertisement
www.seagate.com
3.4
Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the
bottom-mounting holes. See
when mounting the drive:
Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.
Use only 6-32 UNC mounting screws.
The screws should be inserted no more than 0.140 in (3.56mm) into the bottom or side mounting holes.
Do not overtighten the mounting screws (maximum torque: 6 in-lb).
3.4.1
Mechanical specifications
Refer to
Figure 4
Weight:
18TB & 16TB
NOTE
MAX TORQUE 6 IN/LBS
Figure 4.
Mounting configuration dimensions
NOTE
Seagate Exos 2X18 SATA Product Manual, Rev. A
Figure 4
for drive mounting dimensions. Follow these important mounting precautions
for detailed mounting configuration dimensions. See
1.466 lb
665 g
These dimensions conform to the Small Form Factor Standard documented in SFF-8301
and SFF-8323, found at
B
L
L
L
The image is for mechanical dimension reference only and may not represent the actual drive.
www.snia.org/technology-communities/sff/specifications
MAX TORQUE 6 IN/LBS
Configuring and mounting the drive
Section
3.4, "Drive mounting."
23
Advertisement
Table of Contents
