Control Panel........19 Table of Contents Symbols on the Display ....20 1 Safety Instructions......Programme and Consumption Intended Use........Table ..........Safety of Children, Vulnerable Programme Selection....23 Persons and Pets ......Programmes ........23 Electrical Safety......Temperature Selection ....26 Handling Safety ......
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
1 Safety Instructions This section includes the safety – Personnel kitchens of stores, instructions necessary to pre- offices and other work envir- vent the risk of personal injury or onments; material damage. – Ranches, Our company shall not be held –...
with, climb on top or inside the • Do not tuck the power cable product. Check inside the under and behind the product. product before use. Do not place heavy objects on • Use child lock to prevent chil- the power cable. Do not over dren from intervening with the bend, crush and touch the product.
move the product. The upper • Injuries may occur if hands are tray should be tightly fixed for put into uncovered slots. Close moving. the holes of the transportation • Your product is heavy; it safety bolts with plastic plugs. should be carried carefully by •...
come out their seats or sock- • There is a risk of contact with ets with a risk of water con- electrical pieces when the up- tact. per trays is removed. Do not • Use the new hose set provided dismantle the upper tray of the with the product.
• Detergent/maintenance mater- • If washing laundry at high tem- ials may splash out of the de- peratures, the discharged tergent drawer if it is opened washing water would burn your while the machine is working skin if in contact with your Contact of the detergent with skin, for ex.
soap, detergent, gas, gasoline, • Do not dismantle the filter of thinner, alcohol, varnish, etc. the discharge pump while the while cleaning. product is running. • Cleaning agents containing • The temperature in the ma- solvents might reek poisonous chine may rise up to 90ºC. fumes( for ex.
3 Technical Specifications Supplier’s name or commercial brand Beko WRA 9714 XW DR Model name 7001440090 Nominal Capacity (kg) Maximum spin speed (cycle/min) 1400 Built-In Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet + / -...
4 Installation • Total weight of the washing machine and Please read the “Safety Instruc- the dryer -with full load- when they are tions” section first! placed on top of each other reaches to approx. 180 kilograms. Place the product Your washing machine automatic- on a solid and flat floor that has suffi- ally detects the amount of laundry...
Cover B NOTICE Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disas- sembly procedure. Never move the product without the transportation safety bolts properly Rest the tabs of Cover B against the lower fixed in place.
4.5 Connecting the Drain Hose to be longer than 3.2 m. To prevent water leaks, always secure the connection the Drain between the extension hose and the 1. Attach the end of the drain hose directly draining hose of the product with a suit- to waste water drain, washbasin or able clamp so that it does not come off bathtub.
• If the current supply to the fuse or stallation”. To prepare the product for breaker in the house is less than 16 washing laundry, perform first operation in Amps, have a qualified electrician install Drum Cleaning programme. If this pro- a 16 amp supply.
powders on the laundry may build up on 5.5 Correct Load Capacity the inner parts of the product in time and The maximum load capacity depends on can cause damage. the type of laundry, the degree of soiling and the desired washing programme. 5.3 Tips for Energy and Water Sav- The product automatically adjusts the wa- ter amount according to the weight of the...
• Do not select a programme with pre- Filling Liquid Detergent and Softener washing if you are using a detergent pod 1. Open the detergent compartment by or dispensing ball. Place the detergent pulling it towards yourself. pod or the dispensing ball directly among the laundry in the product.
5.6.2 Dosage Selections, Cancella- tion or Use of Powder Deter- gent Liquid detergent cannot be selected in We recommend filling the detergent com- some of the programmes. Powder deter- partment with liquid detergents that can be gent must be used in these cases. For used in common for coloured and white more information, see Programme Table.
5.6.4 Filling Detergent or Softener In case you fill the detergent or the softener in the wrong compartment, see "Cleaning into the Wrong Compartment the Detergent Drawer". 5.7 Tips for Efficient Washing Clothes Light Colours and Black/Dark Col- Delicates/Wool- Colours Whites ours lens/Silks...
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration information 4 Door lock is engaged symbol 5 Programme follow-up indicator 6 No Water indicator 7 Add Garment Indicator 8 Bluetooth Connection Indicator 9 Remote Control Indicator 10 Delayed Start Enabled Indicator 11 Auxiliary Function Indicators 3 12 Child Lock Enabled symbol...
Page 22
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
6.4 Programme Selection but effective washing performance is en- sured with intense washing movements. If 1. Determine the programme suitable for the quick wash function is not selected, ef- the type, quantity and soiling level of the fective washing and rinsing performance is laundry in accordance with "Programme ensured for your heavily soiled laundry.
Page 24
• Spin + Drain When washing more than 6 shirts, there may be differences on the wrinkle levels You can use this program to remove the and humidity on shirts at the end of cycle. water on the garment/inside the machine. •...
Page 25
covers such as gore-tex etc. It makes sure 2. Select the stain you want to clean by your garments are washed gently thanks to locating it in the groups above and se- special rotating movements. lecting the related group with the quick auxiliary function button.
6.6 Temperature Selection commended spin speed value is not the maximum spin speed that can be selected for the current programme. Press the Spin Speed Adjustment button to change the spin speed. Spin speed de- creases gradually. Then, depending on the model of the product, "Rinse Hold "...
If you want to spin the laundry held in wa- 6.8.1 Auxiliary Functions ter, adjust the Spin Speed and press Start/ • Quick Wash Pause button. The programme will resume. After selecting a programme, you can press Water is drained, laundry is spun and the the Quick Wash setting button to shorten programme is completed.
iliary functions even though they are not This is not a washing programme. found on your product. You can increase This is a maintenance programme. and decrease the time of the Cotton and Do not turn this programme on Synthetic programmes within a safe range. when there is something inside the machine.
You can switch on and off the ma- First setup of the HomeWhiz applic- chine with On / Off button when the ation must be complete for the Child Lock is active. When you bluetooth connection to be activ- switch on the machine again, pro- ated.
If you want to cancel End Time function, 3. Loading door is locked. The door lock press On/Off button to turn off and on the symbol appears on the display after the machine. loading door is locked. When you have activated the End Time function, do not add liquid de- tergent in the powder detergent compartment no 2.
adding garments, close the door and press To avoid any water overflow before Start/Pause button once again to resume opening the loading door, make the washing cycle. sure there is no water left inside the machine. 1. Turn off and unplug the appliance. 2.
6.15 HomeWhiz Feature and Re- Changing the auxiliary function, speed and temperature: mote Control Function Depending on the step the programme has HomeWhiz enables you to control your reached, you can cancel or activate the aux- washing machine by using your smart ap- iliary functions.
PLIANCE” (touch here for setting up a In order to use the HomeWhiz func- new appliance) button in the upper right tion, the application must be in- corner. Perform the setup by following stalled on your smart appliance, both the steps below and the steps in and your washing machine must be the HomeWhiz Application.
If you cannot successfully perform the setup within 5 minutes, your washing machine will turn off auto- matically In this case, you will have to start over the setup procedure. If the problem persists contact the Authorised Service Agent. You can use your washing machine with more than one smart appli- HomeWhiz Application may require ance.
6.15.3 Remote Control Function ing the front door. Once access is estab- lished to the product, you will see a screen and Using It similar to the one below. Bluetooth is automatically turned on after setting up HomeWhiz. To activate or deac- tivate the Bluetooth connection, please see Bluetooth 3’’’.
3. Turn bluetooth off and then on via user 4. If the connection cannot be established control panel. with the above processes, repeat the ini- tial set-up settings on the washing ma- chine. If the problem persists, consult an Author- ised Service Agent.
1. Press the blue part in the middle of the 10.Refit the drawer by paying attention to detergent drawer to pull it towards you its slot and slides and push the drawer and remove it. to close. Once detergents and softeners are added, they will be ready for use in dosed programs.
Use only a soft and damp cloth to clean the If the product fails to drain water inside it, control panel. Do not use cleaning products the pump filter is clogged. Filter must be that contain bleach cleaned whenever it is clogged or in every 3 months.
• When the water drain is finished, close If the product has an emergency water the end with the plug again and fix the draining hose, in order to drain the wa- hose in its place. ter: • Unscrew the pump filter. 1.
Page 40
• Excessive laundry is loaded in the and pull down the emergency handle po- product. >>> Take out some of the laun- sitioned at the rear side of the said cap. dry from the product or distribute the See Loading Door Lock [} 30] load by hand to balance it homogen- Washing takes longer than specified in eously in the product.
Page 41
Programme duration does not count- Washing performance is poor: Stains down. (*) persist or the laundry is not whitened. (**) • There is unbalanced load in the product. >>> Automatic unbalanced load detection • Insufficient amount of detergent is used. system is activated due to the unbal- >>>...
Page 42
• A higher temperature was selected. >>> take this detergent during rinsing or Select the proper programme and tem- softener step. Wash and clean the drawer perature according to the type and soiling with hot water. Put the detergent in the degree of the laundry.
Therefore, please be advised that accordance with the following instructions repairs by professional repairers (who (see the “Self-Repair” section). are not authorized by Beko ) shall void Therefore, unless otherwise authorized in the guarantee. the “Self-Repair” section below, repairs...
Page 44
, might give raise to safety issues not attributable to sup- port.beko.com , and will void the warranty of the product. Therefore, it is highly recommended that end-users refrain from the attempt to carry...
Page 45
When the appliance is turned off, pressing 1 and 2 auxiliary function buttons are pressed for a long time, a 3-2-1 countdown, and the total washing cycles completed on the appliance is displayed. After the total washing cycle is displayed, the failure codes, if any, are displayed. Check the information on the screen through the table below.
Need help?
Do you have a question about the WRA 9714 XW DR and is the answer not in the manual?
Questions and answers