Factory Default Settings - EPH Controls CDC2 Installation And Operation Manual

Factory Default Settings

High and Low Temp. limitation:
Keypad lock:
Operating mode:
Temperature indicator:
Frost protection:
HYS On:
HYS OFF:
Temperature selection range:
Temperature sensor:
Note:
Frost protection is built into this thermostat.
It will only be activated when the thermostat is in OFF position and the temperature reaches 5˚C.
2
Off
Off
Normal
˚C
On (5˚C)
5˚C
0˚C
CyL (Hot Water Parameters)
Connected
CDC2