Table of Contents
Advertisement
Quick Links
BSP824/828/829
Cordless Pistol Screwdriver
Operation Manual
CAUTION — Please read, understand, and follow all operating and safety instructions in
this manual before using a BSP8 screwdriver.
If you have any questions or concerns, please contact us at:
Delta Regis Tools Inc.
7030 Commercial Circle
Fort pierce, FL 34951
USA
Doc. Delta Regis_BSP8_Series_M_R0.0
Copyright © 2021 Delta Regis Tools Inc
Ph +1-772-465-4302
Fx +1-772-465-4368
Email: sales@deltaregis.com
Website: www.deltaregis.com
Advertisement
Table of Contents
Related Manuals for Delta Regis BSP824
Summary of Contents for Delta Regis BSP824
- Page 1 If you have any questions or concerns, please contact us at: Ph +1-772-465-4302 Delta Regis Tools Inc. Fx +1-772-465-4368 7030 Commercial Circle Email: sales@deltaregis.com Fort pierce, FL 34951 Website: www.deltaregis.com Doc. Delta Regis_BSP8_Series_M_R0.0 Copyright © 2021 Delta Regis Tools Inc...
- Page 2 • Use only the factory specified Delta Regis brand replacement parts and accessories with these tools. • And damage to the tool, battery, and/or battery charger resulting from misuse, abuse, or failure to follow these guidelines will void the limited product warranty.
- Page 3 Accessory kit (1) - Torque lock sleeve (1) - Waist hook (1) - Phillips power bits (2) • Operation manual (1) Specifications Cordless Inline Screwdriver Model BSP824 BSP828 BSP829 Input Voltage 10.8 VDC Torque (Nm) 0.5-2.0 0.8-3.0 1.5-4.5 Torque Accuracy ±3%...
- Page 4 BSP8 Cordless Inline Screwdriver Operation Manual Tool Overview ESB-10VL2500 Battery Provides power to the tool, slides into back (hold button on battery to remove) Indicator Lights Indicate battery charge and rundown status (see pg. 6) Forward/Reverse Switch Selects tool rotation (CW/Lock/CCW) Trigger Switch Press to start tool when unlocked, toggle high/low speed when locked...
- Page 5 BSP8 Cordless Inline Screwdriver Operation Manual Quick Set-Up and Operation Overview 1. Fully charge the battery using the battery charger before first use to achieve maximum fastening cycles. Slide the battery into the end of the screwdriver. 2. Ensure that the screwdriver’s FWD/REV switch is ‘OFF’ (central position). While the switch is in this position, the tool’s speed can be toggled between high and low by pressing and holding the trigger switch for 5 seconds.
- Page 6 BSP8 Cordless Inline Screwdriver Operation Manual Indicators There are two indicator lights on the BSP8 screwdrivers. The light nearer to the back of the tool [1] indicates the rundown status. When the tool stops running, it will light up green if the target torque was hit and the clutch deactivated the tool, indicating a good rundown.
- Page 7 BSP8 Cordless Inline Screwdriver Operation Manual Parts and Accessories If you require parts or accessories for your Delta Regis product, please refer to our website or contact us for further information. Service This device is not user serviceable. Any repairs must be performed by a Delta Regis authorized service center. Please consult Delta Regis Tools for further information and the location of the nearest authorized service center.
Need help?
Do you have a question about the BSP824 and is the answer not in the manual?
Questions and answers