Steam Boost Button; Features - Morphy Richards Speed Steam Pro Instructions Manual

RN332103MEE Rev2.qxp_Morphy Richards Instruction Book 25/08/2021 14:39 Page 13
3
The temperature indicator light (4) illuminates green when the
temperature is reached. Begin ironing when the temperature
indicator light is on.
Wait for the steam level indicator (24) to stop flashing before using
steam.
The iron features a single temperature setting - IntelliTemp, which is
suitable for all ironable fabrics.
Do not use on fabric that have the "do not iron"
4 Unlock the iron from its storage position on top of the base unit (16)
by sliding the iron-to-base lock (8) to the position marked with an
unlocked padlock icon - the iron can then be lifted off the base unit.
WARNING: The soleplate will be hot.
During use, the iron may be rested on the iron rest plate (13).
5 Press the steam level select button (23) to select your desired
steam level. The selected steam level will be displayed by
illumination of the relevant steam level indicator (24). The steam
level indicator will stop flashing and illuminate constantly when the
selected steam level is reached.
WARNING: The steam supply cord will get hot during use.
6
When you have finished ironing, turn off the appliance by pressing
and holding the On/Off power button (22) for three seconds. A
beep will be heard and all the indicators on the control panel (15)
will be extinguished.
Disconnect the plug from the mains outlet.
NOTE: The product may occasionally produce a pumping sound
during steam ironing. This is normal and is caused by water being
pumped from the water tank to the steam generator.

Steam boost button

The steam boost function is ideal for relaxing the fibres of
tougher fabrics (like jeans and linen) and getting rid of those
stubborn, hard to reach creases.
To produce a steam boost during ironing, simply press the steam
trigger (6) twice in quick succession. To turn this off, press the
steam trigger again.
To conserve water in the tank, we recommend you switch off the
steam boost when the iron is not in use.
symbol.
7

Features

Dry ironing
To use your steam generator as a dry iron only, follow steps 2, 3
and 4 of 'Using the Steam Generator' . You do not need to put water
in the tank or select a steam level. Press the steam trigger (6) at
least once every 10 minutes, or the product will automatically turn
off.
Auto shut-off
If the iron is not used for 10 minutes, the product will automatically
turn off for safety and to save energy, and a beep will be heard.
To restart, press the On/Off power button (22) (see step 2 of 'Using
the Steam Generator') and wait for the temperature to rise again.
Steam function
During steaming, small amounts of water may be ejected from the
soleplate (5). This is normal and can be avoided by using the
steam for short amounts of time and only when the iron is at the
correct temperature (the temperature indicator light (4) on the iron
illuminates when ready).
Sudden jolts of the boiler unit can also cause water droplets on the
soleplate; therefore, do not move the base unit during ironing.
We recommend for first time ironing that you iron over an old
towel.
Vertical steam 8
Vertical steam is useful for removing creases from hanging clothes,
curtains, upholstery, etc. Hold the iron between 1cm and 2cm away
from the item and press the steam trigger (6) twice in quick
succession for a longer boost of steam. To turn the steam boost off,
press the steam trigger again.
WARNING: Do not use the vertical steam feature on clothes
that are being worn.
g
13