Related Manuals for Redarc Smart Start SBI12
Summary of Contents for Redarc Smart Start SBI12
- Page 1 Smart Start SBI ® Smart Battery Isolator MODELS: SBI12 ƒ SBI24 ƒ SBI212 ƒ SBI224 ƒ Dual-Sensing ƒ...
-
Page 2: Warnings And Safety Instructions
Do not connect the connect to the carburettor, fuel lines, or sheet- Electronics Pty Ltd. Any use of such marks by REDARC is under license. metal body parts. Only the start battery should be connected to the chassis. -
Page 3: Product Function
RECOMMENDED FUSES Mount the Smart Start SBI securely in a convenient ƒ ® REDARC Fuse Kits are recommended as they contain high location near the start battery bank. quality, reliable fuses and fuse holders. Do not mount in direct engine heat. ƒ... - Page 4 STANDARD WIRING DIAGRAM WIRING Ground Wire ƒ Ensure adequately sized cable is used. 1. Make sure the auxiliary battery negative is properly Start Override (BLACK) Terminal grounded to the vehicle chassis. (1) Wire ƒ Ensure the auxiliary battery is properly grounded to a (BLUE) Auxiliary common chassis earth point.
- Page 5 ® ƒ Immediately protect itself by disconnecting the auxiliary battery; and Yes. Please contact REDARC for further information. ƒ Flash the LED 3 times for 20 seconds, then reassess the presence of a fault, continuing until the fault is cleared.
-
Page 6: Specifications
2 years Standards CE, C-Tick, AS/NZS CISPR11:2004 *D indicates Dual Sensing Models. Voltage tolerance of ±0.1 V CONTACT Tech Support 1300 REDARC (1300-733-272) Australia +61 8 8322 4848 New Zealand +64 9 222 1024 UK & Europe +44 (0)20 3930 8109...
Need help?
Do you have a question about the Smart Start SBI12 and is the answer not in the manual?
Questions and answers
I have a Pajero Sport with a REDARC isolator fitted which is connected to an andersen plug on the towbar, Can I run a second circuit from the isolator to a second anderson plug inside the car?
Yes, a Redarc Smart Start SBI12 isolator can be used to run a second circuit to an Anderson plug inside a Pajero Sport, as long as proper wiring, fusing, and installation practices are followed. The isolator supports dual battery setups and can handle circuits like an Anderson plug for auxiliary power.
This answer is automatically generated