Handling And Safety Instructions - IMAGO VisionCam XM Hardware Manual

Hide thumbs Also See for VisionCam XM:
Table of Contents

Advertisement

1 Handling and Safety Instructions

1 Handling and Safety Instructions
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
Depending on the operating conditions, the housing temperature can exceed
60 °C. There is a risk of injury!
Electrical installation should be executed without power applied to the device
and connected devices.
EMC conformity according to EN/IEC 61000-6-2:2005 is qualified for cable
lengths ≤ 30 m.
Only open the housing if advised by IMAGO!
➔ Warranty void if product is opened without authorization by IMAGO.
Please take special note of the voltage range which may be applied to the device.
Otherwise, permanent damage to the device may result!
Due to the characteristics and physical principles inside flash memory, memory
cards have a finite lifetime dictated by the number of write operations.
Therefore, take care of the regular write operations to prevent an early flash
damage.
IMAGO Technologies GmbH
info@imago-technologies.com;
www.imago-technologies.com
Page 4 / 39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Visioncam lmVisioncam eb

Table of Contents