Status Leds - IMAGO VisionCam XM Hardware Manual

4 Interfaces

Status LEDs

LED Green
2
ETH Ethernet link is up
EXP Sensor exposure active
STR Internal strobe active
USR1 Programmable by SDK (LED 2)
USR0 Programmable by SDK (LED 0)
POW Power on, FPGA configured
I0 ... I1 Digital input status
O0 ... O3 Digital output status
2
The ETH LED is inactive for the RJ45 connector version.
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
IMAGO Technologies GmbH
info@imago-technologies.com;
Red / Yellow
Ethernet activity (blinking)
External strobe output active
Programmable by SDK (LED 1)
Power on, FPGA not configured
www.imago-technologies.com
Page 16 / 39