Page 1
EEI-1525 OFFICE CHAIR Thank you for purchasing the MODWAY OFFCIE CHAIR. Before you start, here are some helpful advice: 1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2. Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
Page 2
EEI-1525 OFFICE CHAIR STEP 1: 1. Please put Base (1) on a carpeted or padded surface. 2. Insert 5 pieces of Castors (3) into the Base (1) as shown by hand in Figure 1. 3. Carefully turn over the assembled Base (1) and Insert the Cylinder Column (2) as shown in Figure 2.
Page 3
EEI-1525 OFFICE CHAIR STEP 4: Assembly is complete. Your office chair is ready to be used now! Attention: When you use the handle to adjust the height to be lower, please move away your legs from the base at the same time.
Need help?
Do you have a question about the EEI-1525 and is the answer not in the manual?
Questions and answers