Table of Contents
Advertisement
10
3.4 Placement
The drying cabinet intended for placement indoors in dry place.
Place the bottom plate in the final position of the drying cabinet.
The drying cabinet should be positioned so that there is plenty of room for working, both for the user and service
personnel.
• First place the bottom plate (see page 11) in the intended position. The cabinet must stand level of a flat surface,
resting on all six feet.
• Adjust the adjustable feet with a slotted screwdriver. After adjustment, press cover plugs into the holes of the ad-
justable feet. See the next chapter.
3.5 Ventilating the room
When the machine is in operation, the room temperature increases. Due to this, the room must have sufficient
ventilation.
All sources introducing heat into the same room requires to be considered when dimensioning the ventilation. Heat
sources could for example be: more tumble dryers, drying cabinets, washers, ironers, radiators, etc. The combination
of several sources for heat introduction leads to an increased need for ventilation flow. Other factors may also influ-
ence the needed ventilation flow, such as climate zone, building parameters, room size, etc. For assistance with di-
mensioning necessary ventilation needs, contact authorized ventilation technician.
Installation manual
Advertisement
Table of Contents
