Webui Maintenance Operations; Upgrading The Device Firmware Version - Huawei SmartLogger3000 User Manual

SmartLogger3000
User Manual
Alarm Alarm Name
ID

7.4 WebUI Maintenance Operations

7.4.1 Upgrading the Device Firmware Version

Context
You can upgrade the software of the SmartLogger, inverter, Smart PCS, Smart
String ESS, MBUS module, or PID module on the WebUI.
Procedure
Step 1 Perform an upgrade.
Figure 7-1 Upgrade
Issue 10 (2022-08-20)
Alarm Alarm
Severity Sub-ID
Minor 7
Minor 8
Copyright © Huawei Technologies Co., Ltd.
Cause Suggestions
No available 1. Check whether the DC cable
PCS. connection of the PCS is
normal.
2. Check whether the
connection box switch on the
DC side of the PCS is turned
on.
3. Check whether the
communication between the
PCS and the SmartLogger is
normal.
The black Check the PCS device alarms and
start of the handle them based on the alarm
PCS failed. clearance suggestions.
7 Device Maintenance
242