Huawei SmartLogger3000 User Manual page 36

SmartLogger3000
User Manual
Indicators
Indicator
Running
indicator
(RUN)
Alarm/
Maintenance
indicator
(ALM)
Communications Ports
●
Issue 10 (2022-08-20)
Status
Green off
Blinking green slowly (on for
1s and then off for 1s)
Blinking green fast (on for
0.125s and then off for 0.125s)
Alarm status
GE ports: four Ethernet electrical ports. Connect the LAN port of the
SmartLogger to one GE port of the SmartModule using an Ethernet cable. The
SmartModule obtains an IP address from the DHCP server and automatically
registers with the SmartLogger. The SmartLogger can use all communications
ports of the SmartModule.
Copyright © Huawei Technologies Co., Ltd.
Description
The SmartModule is not
powered on.
The communication with the
SmartLogger is normal.
The communication with the
SmartLogger is interrupted.
Red off No alarm is raised for the
SmartModule.
Blinking red The SmartModule is running
slowly (on for in non-encryption status.
1s and then
off for 4s)
Blinking red The SmartModule digital
fast (on for certificate is invalid.
0.5s and then
off for 0.5s)
Steady red Reserved.
2 Product Overview
24