Espressif Systems ESP32-S3-MINI-1 User Manual page 18

4 U.S. FCC Statement
As long as the conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements required
with the modules installed (for example, digital device emissions, PC peripheral requirements, etc.).
Validity of Using the Module Certification
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with
another transmitter), then the FCC authorization for the modules in combination with the host equipment is no
longer considered valid and the FCC ID of the modules cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter)
and obtaining a separate FCC authorization.
End Product Labeling
The final end product must be labeled in a visible area with the following: "Contains Transmitter Module FCC ID:
2AC7Z-ESPS3MINI1".
Espressif Systems 18
ESP32-S3-MINI-1 & MINI-1U User Manual v0.6
Submit Documentation Feedback