Cisco Nexus 7010 Series Installing page 19

Installing a Cisco Nexus 7010 Chassis
Installing the Front Doors and Frame Assembly
Figure 11: Installing the Bottom Frame
1 Bottom frame assembly with screw holes aligned to screw holes in chassis 2 Four M4 x 6 mm screws
Step 2 For each of the two front doors, match the two alignment pins on the door frame to the alignment holes on the chassis.
Position each door frame immediately under the cable management area (see Figure 12: Installing the Front Doors, on
page 20).
Installing a Cisco Nexus 7010 Chassis
19