Operating Instructions - Worx WX100L Safety And Operating Manual

SUGGESTED BATTERIES AND
CHARGERS
Category
20V Battery
20V Charger
We recommend that you purchase your accessories listed
in the above list from the same store that sold you the tool.
16
Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.

4.OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the instruction
book carefully.
ASSEMBLY AND OPERATION
ACTION
BEFORE OPERATION
Model Capacity
WA3525 2.0Ah
WA3575 2.0Ah
WA3742 0.4A
WA3881 2.0A
FIGURE
Removing & Installing the battery pack
Charging the battery pack
ASSEMBLY
CHUCK ADJUSTMENT
WARNING: Always lock off trigger switch and
disconnect tool from power source when changing
accessories. Always ensure the bit is secure before starting
the tool. Damage to the Chuck or a loose bit may cause
possible personal injury.
--Removing the bits
--Inserting the bits
-- Assembling the belt hook
OPERATION
FORWARD/REVERSE ROTATION
CONTROL
WARNING: Never change the
direction of rotation when the
chuck is rotating, wait until it has stopped!
TWO-SPEED GEAR CONTROL
See Fig. A1
See Fig. A2,
See Fig. B1
See Fig. B2
See Fig. C1,
C2
See Fig.D1,
D2,D3
See Fig. E