Advertisement
Locking Latch Plate and ELR Retractor
A latch plate that holds the lap belt snug after it has been
adjusted; contains a metal bar on the underside of the hardware
that "locks" the belt in position.
When installing the car seat, route the vehicle seat belt through
the proper belt path and buckle it in. Then, pull upwards on the
shoulder belt so that the lap belt gets tight around the car seat.
Grab the sides of the seat at the belt path and slide the seat
side-to-side and front-to-back. The seat should not move more
than 1" (2.5 cm).
91
Advertisement
