Advertisement
Using Belt Positioning Clip
1. Make Sure Vehicle's Seat Shoulder Belt Lays
in the Red Zone As Shown
If the vehicle's seat shoulder belt lays outside this
zone, you MUST use the belt positioning clip. Do
not use the belt position clip if the belt is already
laying inside this zone.
2. Attach Belt Positioning Clip
The shoulder belt positioning clip MUST be
attached to the slot on the bottom of the base.
Insert the loop end of strap through the slot on
bottom of seat exactly where shown.
3. Push Clip and Strap Through Loop
Pass the clip and the strap through the loop end
as shown and pull strap up.
80
Advertisement
