Advertisement
8. Tighten the Vehicle Seat Belt
Press down firmly in the center of the car seat. Pull on
the shoulder belt to tighten while feeding the slack back
in the retractor. Do not pull on the strap with excessive
force.
9. Close the SnugLock
®
When the slack is removed, close the SnugLock
Off until you hear a "Click". Make sure the vehicle
seat belt is under the SnugLock
Note: When using the lock-off, you are not required to
switch the retractor as an installation step. The lock-off
locks the seat belt. However, it is recommended to
switch the retractor after the installation is complete to
avoid a possible strangulation risk.
Keep hands away from the lock-off
area when closing the lock-off.
Lock-Off
®
Lock-Off.
®
47
Lock-
CLICK!
Advertisement
