Page 1
ISCOM2016 Hardware Installation User Manual...
Page 2
Raisecom Technology Co., Ltd shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Page 3
+86-10-82883305 Fax: +86-10-82883056 World Wide Web You can access the most current Raisecom product information on the World Wide Web at the following URL: http://www.raisecom.com Feedback Comments and questions about how the ISCOM2016 device works are welcomed. Please review the...
Page 5
Preface About This Manual This manual is for users of ISCOM2016 series switches with hardware version higher than VER.C.00. Who Should Read This Manual This manual is a reference for device installation and maintenance staff. Relevant Manuals 《ISCOM2016 Series Switches Commands Notebook》...
User Manual General Safety Instructions The following instructions serve as a general guide for the safe installation and operation of telecommunications products. Additional instructions, if applicable, are included inside the manual. Safety Symbols This symbol may appear on the equipment or in the text. It indicates potential safety hazards regarding product operation or maintenance to operator or service personnel.
Page 7
User Manual be present inside certain products even when the power switch (if installed) is in the OFF position or a fuse is blown. For DC-powered products, although the voltages levels are usually not hazardous, energy hazards may still exist.
Chapter 1 Overview 1.1 Overview of this manual This manual mainly discusses the installation of ISCOM2016 switch. It describes the features of the switch, introduces its components and the functions these components accomplish. The manual brings forth the normative installation process of the device for users and explains the types and specifications of all cables applied during the installation.
Chapter 2 Specification and Dimension 2.1 Device hardware description ISCOM2016 Ethernet Switch is a layer-2 Ethernet switch designed for network users’ access to the carriers’ network. ISCOM2016 has 16 10/100BASE-TX Ethernet interfaces. The power consumption of the device is less than 15W.
16 10/100M Ethernet interfaces, 1 CONSOLE interface and dozens of status indicators are placed on the front panel of ISCOM2016 switch (see the figure below). In the figure shown above: ① The logo and model of the switch are RAISECOM and ISCOM2016 respectively. ② 2 device status indicators: SYS and PWR. Indicator...
OFF status. ⑤ The CONSOLE interface. 3.2 Device rear panel description ISCOM2016 only provides a socket for 220V AC power supply on its rear panel (see the figure below). In the figure shown above: ① The place where the socket for 220V AC power supply locates.
4.2 Device installation 4.2.1 Environment requirement There are heat exhaust outlets on both sides of ISCOM2016 switch. Please leave space on both sides of the switch to keep air flow unblocked. Please make sure the outlets are not blocked. 4.2.2 Install the device on to a rack To set the switch firmly into a rack, please fix the installation tray to the switch using the four screws come with the device and fasten the installation handle on to the rack.
Page 13
Type Number Number 3) CONSOLE interface connecting pattern and parameter setup The connecting of ISCOM2016 CONSOLE interface and PC serial port is shown in the figure below. 4、5 PC Serial Pot ISCOM2016 CONSOLE The values of the connecting parameters of the terminal simulation program on the PC are as...
PC with MDI interface by straight through cable. 4.3.3 Connect to the power supply ISCOM2016 adopts 220V AC power supply. Please connect the socket on the rear panel of the switch with 220V AC power supply using the provided power supply cable.
User Manual Chapter 5 Notes The installation, maintenance, plugging in and pulling out of components of ISCOM2016 switch can only be conducted by qualified technical support staff. Please place the device in a temperature-controllable and humidity-controllable room and please be cautious of the conductivity of the materials around the device.
Page 17
Address: 2 Floor, South Building of Rainbow Plaza, No.11 Shangdi Information Road, Haidian District, Beijing Postcode: 100085 Tel: +86-10-82883305 Fax: +86-10-82883056 Email: export@raisecom.com http://www.raisecom.com...
Need help?
Do you have a question about the ISCOM2016 and is the answer not in the manual?
Questions and answers