Connecting The Hardware - Lexmark MarkNet N7000e Series User Manual

2
Setup
Requirements
For setup, you need:
• The Lexmark MarkNet N7000e Series Print Server
• An existing Ethernet (10/100 Base TX) network
• An Ethernet (RJ-45, category 5) cable, purchased separately
• A network-capable printer
To find out if your printer is network-capable, or for other printer-specific information, refer to
the documentation that came with your printer or visit our Web site at:
http://support.lexmark.com.
• The printer software CD that came with your printer
• A computer that meets the following criteria:
– Mac OS X operating system
– A CD-ROM drive
– Connected to the network
– TCP/IP active and running

Connecting the hardware

Follow all of the steps on the Setup Guide that came with your print server.
Setup Guide
Setup
4