Chapter 6: Setting Up An Alerts Message - Lexmark X500 Setup Manual

6
Setting up an alerts message
Note: SMTP must be configured to use this function. For more information, see Configuring SMTP on
page 17.
To set up alerts messages for this printer:
1
Access the Embedded Web Server.
2
From the Network Setup menu, click the link labeled Alerts Message.
Field
Display Name
Email Address
Please Enter Administrator
Password
The checkboxes located below these fields correspond to the types of alert that this address is going to receive. Select all
of the alerts that you want to be sent for each user by selecting the box next to the description. All boxes that are checked
Description
The name that is displayed as the sender of the alert message
The e-mail address that the alert message is sent to
Enter the printer administrator password if one is set. By default there is no password, and
you can leave this field blank.
Setting up an alerts message
15