Setting Up Scan To Pc On The Embedded Web Server - Lexmark X500 Setup Manual

Setting up Scan to PC on the Embedded Web Server

Once PC is selected from the Add New Type drop-down menu, you will see the following information that needs to be
completed:
Field
One Touch Button
Full Name (Required)
Service Name (Required)
User Name (Optional)
Password (Optional)
Scanning to a computer
Description
Select a number 1–20 from the list. Once selected, this number corresponds to the button
on the printer that you press when you want to scan to this computer.
The name that appears on the printer display when this computer is chosen
The first field is where you enter the computer name or the IP address of the computer
where the shared folder is located.
The second field is for the share name of the shared folder on the computer.
Note: Do not enter a drive letter or file path for the second field, only the share name. The
location of the folder on the computer does not matter, it will be located by using the share
name.
If the shared resource is protected, you can enter a user name here.
If the shared resource is protected, you can enter a password here.
Setting up Scan to PC on the Embedded Web Server
11